Bushnell TRAILSCOUT 119935 - Manual (Page 13)

13
Setup Guide (cont.)
4. K3 (Model 119833) – (24Hr / DAY/ NIGHT) MODE:
K4 (Model 119935/119905)– (24Hr / DAY / NIGHT) MODE:
5. K4 (Model 119833)– (30s/1Min/2Min) CAMERA DELAY MODE
K5 (Model 119935/119905) – (30s/1Min/2Min) CAMERA DELAY MODE:
There are three modes for taking delayed pictures: 30 Sec, 1 Min and 2 Min.
The unit will record EVENtS while CAMERA is in DELAY MODE each time the PiR senses motion.
(a) 30s: After the first picture, a second picture will be taken 30 seconds later.
(b) 1Min: After the first picture, a second picture will be taken 1 minute later.
(c) 2Min: After the first picture, a second picture will be taken 2 minutes later.
The trail Scout has three operating period modes:
(a) 24Hr: The trail camera is operational both day and night. When the PiR (Passive infra Red sensor)
senses a subject, the camera will take a photo and record an EVENt.
(b) DAY: The trail camera only takes photos during the Daytime (user defined Day start~end period or
default 6am~6pm). When the PiR senses a subject, the unit will take an image and record an EVENt.
if the PiR is triggered between the Day end and Day start times, only an EVENt is recorded-an image
is not taken.
(c) NIGHT: The trail camera only takes photos during the Night (from user set Day end to Day start,
or default 6pm~6am). When the PiR senses a subject the unit will take image and record an EVENt. if
the PiR is triggered during “Day” time, only an EVENt is recorded, an image is not taken.