Controls and functions, Projector – BenQ MP611 User Manual
Page 12
Introduction
8
Controls and functions
Projector
1.
and
"Shutting down the projector" on
for more information.)
Turns the projector on or off.
2.
Blank/Q? (Refer to
and
for more information.)
Used to hide the screen image. You can
press any key on the control panel to
bring the image back.
To start FAQ function, press and hold for
3 seconds.
3.
Mode (Refer to
for more information.)
Sequentially selects a predefined picture
setting available for each input.
4.
for more information.)
Sequentially selects the input signal RGB,
Component Video,
S-Video or
Video.
5.
Auto (Refer to
for more information.)
Automatically determines the best
picture timings for the selected input.
6.
Lamp indicator light (Refer to
for more
information.)
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
7.
Temperature warning light (Refer to
for more
information.)
Flashes red if the projector’s temperature
becomes too high.
8.
Power indicator light (Refer to
for more
information.)
Lights up or flashes when the projector is
under operation.
9.
3 Left
10.
Right
4(Refer to
for more information.)
When the on-screen menu is not
activated, #9 and #10 function as
Keystone -/+ hot keys.
11.
6Menu (Refer to
for more information.)
Turns on the on-screen display control
menu.
13
14
7
12
8
5
4
1
9
10
2
3
11
6