Beko C7 - Manual (Page 16)

15
Language
There are many languages available for the
On Screen Displays (OSD).
Press the OK button to select the
language list.
Press the Program down button to
page through all the languages and
OK
to select.
Note: Only the O.S.D. language will change.
The sound and teletext will remain in the language of
the transmission.
Smart cont.
This gives you a choice of picture type:
SOFT, NATURAL, RICH or USER.
Use the
button to change this type.
You can change the picture type
whilst watching the TV using the
picture Smart control.
Press the picture Smart control to
page through the different picture
types and select the one you want.
Once you have switched the TV off
the picture type will revert to the
user stored setting.
USER allows you to set your own picture
type (see picture menu page 14)
Press the purple button on the remote
control to enter the features menu
Features Menu (Purple button)
LANGUAGE
TIMER
FEATURES
BACK
OK SELECT
Timer: Use Program up and down
buttons to select Timer in the features
menu. Using the Timer fuction, you can
switch to a specific programme at a pre-
programmed time or you can turn your TV
off at the time you want your TV to be
turned off.
Press OK to access the Timer menu.
Clock: Use the numeric buttons to set the
real time (If required).
On Time: Use the program button to select
on time. Use the numeric buttons to set the
time that you want your TV to be turned
on then switch TV to stand-by mode.
Off Time: Use the program button to select
off time. Use the numeric buttons to set
the time that you want your TV to be turned
off (Stand-by mode).
To last 60 seconds will be displayed.
Program No: Use the numeric buttons to
set the programme number that will be
shown when you set the On Time.
CLOCK
ON TIME
OFF TIME
PROGRAM No
TIMER
--:--
--:--
--:--
P1
BACK
Note:
1- Use
Program up/down button to scroll
through the menu.
2. When the function you want to change
is highlighted in white use the Volume +/-
buttons to make any changes.