BT CONVERSE 425 - Manual (Page 9)

BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
8
Using a headset
Plug the headset into the
socket marked
HEADSET on
the underside of the base.
To make a call, press the
Headset button.
Dial the telephone number.
To end the call, press the
Headset button.
Note
Converse headsets (RJ11 jack)
are available separately
from BT shops or by calling
0870 240 5522.
Secrecy
When on a call you can talk to someone
in the same room, without your caller
hearing.
To switch Secrecy on and off
During a call, press and release
the
Secrecy button.
The red Secrecy light will
come on. Your caller cannot
hear you.
To resume your conversation,
press and release the
Secrecy
button again. The Secrecy
light will go off.
USING
To set the call timer
You can time the duration of
each call.
During a call, press the
Clock
button. The time of the
previous call will be displayed.
Press the
Clock button again
to start the timer. You can stop
the time by pressing the
Clock
button once more.
When you replace the handset
or press the
Handsfree button
to end the call, the display shows
the final duration of the call for
a few seconds before returning
to the normal clock setting.
To redial the last number called
Press the
Handsfree button.
Press the
Redial button.
The last number you called is
redialled.
Last number redial
Your Converse 425 stores the last
number called which enables quick and
easy redialling. A redial number can be
no longer than 32 digits.