BT CONVERSE 425 - Manual (Page 12)

BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528
11
USING
Press and hold the ✔ button
until the display shows STORE
and EDIT .
You can now enter another
name and number.
Note
You can stop during any set
of steps and return to
standby by lifting the handset
or pressing the
Handsfree
button.
To edit an entry in the
directory
Press and hold the
Directory
button. Display shows STORE
and EDIT .
Release the
Directory button.
Turn the
Navigator Wheel so
that EDIT is flashing.
Press the ✔ button.
Turn the
Navigator Wheel to
display the entry you want to
change.
Press the ✔ button. The cursor
flashes under the first digit of
the number. If you need to move
the cursor, either press the
✔ button or the
Next ᮣ button
to go forward or the
ᮤ Clear
button to delete a digit.
To store a name and number
in the directory
Press and hold the
Directory
button. Display shows STORE
and EDIT .
STORE will be flashing.
Release the
Directory button.
Press the ✔ button.
Display shows the number of
entries stored in the directory,
followed by
ENTER NUMBER .
Enter the number you want
using the keypad. Alternatively,
turn the
Navigator Wheel until
the digit you want is displayed
then press the
✔ button.
Repeat this step until the full
telephone number is entered.
Press and hold the ✔ button
until the display shows
ENTER NAME .
Enter the letters you want
using the keypad. Alternatively,
turn the
Navigator Wheel to
display the letter required then
press the
✔ button.
Note
If you try to add a new entry
and the directory is full, the
display shows
MEMORY FULL .
To continue, follow steps
shown in ‘To edit an entry in
the directory’ or ‘To delete an
entry in the directory’.