Ultrabass ba410, Important safety instructions – Behringer BA410 User Manual
Page 2
2
ULTRABASS BA410
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this speaker cabinet near water.
6) Clean only with dry cloth.
7) Before putting up the speaker cabinet, you will always have
to make sure that the ground surface is absolutely firm. A
surface that slightly vibrates is unsafe for the cabinet,
therefore: the cabinet should only be put up on firm, even
ground surfaces.
8) Do not put up your speaker cabinet near heat sources such
as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9) Only use attachments/accessories specified by the
manufacturer.
10) Use only with carts, stands, tripods, brackets or tables
specified by the manufacturer or sold with the cabinet. When
a cart is used, use caution when moving the cart/cabinet
combination to avoid injury.
11) Refer all servicing to qualified service personnel only.
Servicing is required when the cabinet has been damaged in
any way (e.g. when the power supply cord or plug have been
damaged), when liquid has been spilled into/onto the cabinet
or objects have fallen into the cabinet, the cabinet exposed
to rain or moisture, does not operate normally, or has been
dropped.
12) Please make sure that no objects or liquid reach the inside
of your cabinet through the openings.