Blaupunkt Denver CD70 - Manual (Page 23)

51
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
CD changer operation
(optional)
On page 34 of this guide you can find which
CD changers can be used with this device.
You can also refer to your Blaupunkt dealer.
Note:
The operating instructions for your CD chang-
er will provide information about handling
CDs, inserting them and operating the CD
changer.
Starting CD changer operation
➮
Press the CDC button,
=
.
The CD changer menu is displayed, and play
will continue from the point where it was last
interrupted. If the magazine is removed from
the CD changer and re-inserted, play will start
with the first track on the first CD detected by
the CD changer.
Selecting a CD
➮
In order to change up or down to anoth-
er CD, press the or button,
7
, until
the number of the CD you want appears
on the display.
Selecting a track
➮
In order to change up or down to anoth-
er track on the current CD, press the
or
button,
7
, until the number of the
track you want appears on the display.
If the button,
7
, is pressed once the cur-
rent track is started again.
Fast searching (audible)
In order to search rapidly backwards or for-
wards
➮
hold down one of the or buttons,
7
, until the fast search backwards of
forwards starts.
Changing the display contents
You can choose between different display
modes during CD changer operation:
●
Display of CD number, track number
and time.
●
Display of CD number, track number
and playing time.
●
Display of CD name and track number.
➮
In order to change between the display
modes, press the DIS button,
:
, as of-
ten as you need for the desired informa-
tion to be shown on the display.
Note:
It is only possible for a CD name to be dis-
played if the inserted CD has been provided
with a name. Read the section on “Naming
CDs”.
Repeat play of individual tracks or
whole CDs (REPEAT)
➮
Press the softkey,
4
, indicating “RPT”.
“RPT TRCK” appears briefly on the display.
➮
In order to repeat play of the whole CD,
press the softkey,
4
, indicating “RPT”
again.
“RPT DISC” appears briefly on the display.
Stopping REPEAT
In order to stop repeating either the current
track or the current CD
➮
press the softkey, 4, indicating “RPT” as
often as necessary for the “RPT OFF” to
be shown in the display.
Playing tracks in random
sequence (MIX)
In order to play the tracks on the current CD
in a random sequence
➮
Press the softkey,
4
, indicating “MIX”.
“MIX CD” appears briefly on the display.
CD CHANGER OPERATION