Blaupunkt Denver CD70 - Manual (Page 18)

46
Traffic Information
You car radio is equipped with an RDS-EON
receiver.
EON (Enhanced Other Network) stands for
the broadcasting of station information within
a broadcasting network.
If a traffic announcement (TA) is made, your
radio will tune automatically from a non-traf-
fic-information station to a traffic-information
station with the broadcasting network.
The radio then reverts to the programme pre-
viously heard once the traffic announcement
is over.
Switching traffic information
priority on and off
➮
Press the softkey,
4
, indicating “TA”.
Traffic announcement priority is activated if
“TA” appears with light and shade reversed.
Note:
You will hear a warning tone
● if you leave the reception area of a traf-
fic radio station to which you are listen-
ing,
●
if, when you are listening to a CD, tape
cassette or MiniDisc (according to how
the radio is equipped) the reception
area of the selected traffic radio station,
and the automatic search which then
follows fails to find a new traffic radio
station,
● if you change from a traffic radio station
to a station with no traffic information.
Either switch off the traffic information priority
or change over to a station with traffic infor-
mation.
TRAFFIC INFORMATION
Switching between stereo and
mono
When radio reception is poor you can switch
the mode to mono. The changeover from ster-
eo to mono is executed smoothly. The radio
plays in stereo after being switched on. The
selection of stereo or mono is made via the
menu.
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, as often
as is necessary for “STEREO” or
“MONO” to appear in the display.
➮
Press the or button,
7
, to choose
between stereo and mono.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Changing the displayed
information
You can select the information shown on the
display.
The upper display line (the headline) can dis-
play the station name, frequency or the pro-
gram type. The lower display line (DOT field)
can display the time or the memory level.
Changing the headline
➮
Hold down the DIS button,
:
, until the
desired information, i.e. the station
name, frequency or program type, ap-
pears.
Changing the DOT field
➮
Hold down the DIS button,
:
, for long-
er than one second.
The display switches between time and mem-
ory level.
RADIO OPERATION