beautypg.com

Instructions for use, Temperature control and adjustment, Before operating – Beko BK 7641 T User Manual

Page 8

background image

Instructions for use

4

in tightly closed containers. Never store products

that contain an inflammable propellant gas

(e.g. cream dispensers, spray cans, etc.) or

explosive substances. These are an explosion

hazard.

Temperature control

and adjustment

Operating temperatures are controlled by the

thermostat knob (Fig. 2) and may be set at

any position between 1 and 5 (the coldest

position).

The average temperature inside the fridge

should be around +5°C (+41°F).

Therefore adjust the thermostat to obtain the

desired temperature. Some sections of the

fridge may be cooler or warmer (such as salad

crisper and top part of the cabinet) which is

quite normal. We recommend that you check

the temperature periodically with a thermometer

to ensure that the cabinet is kept to this

temperature. Frequent door openings cause

internal temperatures to rise, so it is advisable

to close the door as soon as possible after use.

Before operating

Final Check

Before you start using the appliance check

that:
1.

The feet have been adjusted for perfect

levelling.
2.

The interior is dry and air can circulate

freely at the rear.
3.

The interior is clean as recommended under

"Cleaning and care."
4.

The plug has been inserted into the wall

socket and the electricity is switched on.

When the door is open the interior light will

come on.

And note that:
5.

You will hear a noise as the compressor

starts up. The liquid and gases sealed within

the refrigeration system may also make some

(noise), whether the compressor is running or

not. This is quite normal.
6.

Slight undulation of the top of the cabinet

is quite normal due to the manufacturing

process used; it is not a defect.
7.

We recommend setting the thermostat

knob midway and monitor the temperature

to ensure the appliance maintains desired

storage temperatures (See section Temperature

Control and Adjustment).
8.

Do not load the appliance immediately it

is switched on. Wait until the correct storage

temperature has been reached. We

recommend checking the temperature with

an accurate thermometer (see; Temperature

Control and Adjustment).

GB