Broilmaster T3N-1 T3C-1 - Manual (Page 9)

Page 9 B101051-0-1106
1. Mount grill onto cart, post or base per the mounting in-
structions.
2. Place radiation shield (13) (flange side up) onto four
raised bosses located on the interior bottom of the grill.
Secure with four 1/4-20 x 3/4 screws. See Figure 1.
3. Place burners (8) into grill and insert burner tubes over
orifice fittings on valve (17). Secure each burner with
one (1) 1/4-20 x 3/4 phillips screw. See Figures 2, 3 and
4.
G
RILL
A
SSEMBLY
Figure 1
Figure 2
Figure 3
Figure 4