Blaupunkt SAN FRANCISCO CD72 - Manual (Page 42)

84
External audio sources
You can connect up to two external au-
dio sources to the unit. The audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
You can connect the first external au-
dio source (AUX1) instead of a CD
changer.
You can connect the second external
audio source (AUX2) in addition to the
CD changer or AUX1. Instead of AUX2,
you can connect a navigation system.
For further information, read the section
entitled “Navigation audio” in the “Ad-
justing the volume” chapter.
In order to be able to use the AUX in-
puts, you must activate the AUX inputs
in the setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
➮
Press the MENU button
8
.
➮
Press the softkey
4
assigned to
the “SETP” display item.
➮
Press the softkey
4
assigned to
the “AUX1” or “AUX2” display item
for the input that you want to switch
on/off.
The AUX menu is displayed.
Note:
●
If a CD changer is connected, you
cannot adjust the “AUX1” input.
➮
Press the softkey
4
assigned to
the “AUX2” display item if no navi-
gation system is connected and
you want to connect an external
audio source.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Note:
●
If the AUX inputs are activated they
can be selected by pressing the
SOURCE button
;
.
EXTERNAL AUDIO SOURCES