Blaupunkt SAN FRANCISCO CD72 - Manual (Page 16)

58
Subwoofer and centre
speaker
Selecting the subwoofer
frequency
You can select the frequency at which
you want to drive a connected subwoof-
er. This setting depends on the subwoof-
er being used.
➮
Press the AUDIO button
9
.
“AUDIO 1” appears in the display.
➮
Press the softkey
4
assigned to
the “SUB” display item.
➮
Set the correct frequency for your
subwoofer using the joystick
7
.
Adjusting the subwoofer boost level
➮
Select the subwoofer frequency as
described above.
➮
Move the joystick
7
up to boost
level (volume) for the subwoofer or
move it down to reduce the level.
When you have finished making your
changes,
➮
press the joystick OK
7
or the
AUDIO button
9
.
The settings are saved.
Adjusting the subwoofer phase
You can adjust the phase of the sub-
woofer output to suit your subwoofer.
The phase setting can be set to “0
° ” or
“180 ° ”.
➮
Press the AUDIO button
9
.
“AUDIO 1” appears in the display.
➮
Press the NEXT button
3
.
“AUDIO 2” appears in the display.
➮
Press the softkey
4
assigned to
the “SUBP” display item.
➮
Use the softkey
4
that is assigned
to the “SUBP” display item to
switch between the 0 and 180 de-
gree phase settings.
When you have finished making your
changes,
➮
press the joystick OK
7
or the
AUDIO button
9
.
The settings are saved.
SUBWOOFER AND CENTRE SPEAKER