Behringer MIC200 - Manual (Page 8)

8
TUBE ULTRAGAIN MIC200
Use the POWER SUPPLY CONNECTOR to hook up the en-
closed power supply unit. Next to this connector you’ll find the
strain relief clamp, which prevents accidental release of the
power supply.
2.3 Serial number
The MIC200’s serial number is located on the bottom cover. Please
take time to fill in and return the warranty card within 14 days after the
date of purchase, so you can benefit from our extended warranty.
Or use our online registration option available on the World Wide Web
at www.behringer.com.
3. WIRING EXAMPLES
You’ll be surprised how flexible the MIC200 is. The following
chapter describes some typical wiring examples.
3.1 Enhancing vocals and instruments in live applications
Here, the MIC200 is wired before the mixer’s channel input. Thus,
the sound gains in warmth and transparency. Thanks to the limiter
setting for vocals (VOCAL), distortion is eliminated effectively.
Fig. 3.1: Standard live application
3.2 “Direct to disk” application in studio or home recording
environments
If you are looking for a piece of equipment that considerably enhances
the sound of your digital workstation, this is where the MIC200 comes
in handy. Many hard disk recorders lack that typical “liveliness”.
3. WIRING EXAMPLES