Philips MiniVac Handstaubsauger - Manual (Page 15)

Problem Solution
The appliance
does not work.
The batteries may be low. Recharge the batteries.
You may not have placed the appliance on the
charger properly. Place the appliance on the charger
properly. the charging light goes on to indicate that
the appliance is charging.
You may not have put the adapter properly in the
wall socket. Put the adapter properly in the wall
socket.
The contact points on the appliance and/or on the
charger may be dirty. Wipe them clean with a dry
cloth.
The appliance may have been switched on while it
was on the charger. Make sure the appliance is
switched off when you charge it.
If the appliance still does not work, take the
appliance to your dealer or a service centre
authorised by Philips for examination.
The charging
light does not
go on.
Make sure that the adapter is inserted properly in
the wall socket and that the appliance is switched off.
The vacuum
cleaner does
not vacuum
properly.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
The dust compartment may be full. Empty the dust
compartment.
The filter unit may be clogged. Clean the inner filter
and the outer filter (see chapter ‘Cleaning’).
English 15