Philips MiniVac Handstaubsauger - Manual (Page 12)

7 Put the inner filter back into the outer filter (1) and turn it
clockwise to lock it (2) (Fig. 21).
8 Put the filter unit back into the dust compartment (Fig. 18).
Note: Make sure you insert the filter unit in the correct way.
9 To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the
dust compartment towards the appliance (2) until it locks into
place (‘click’) (Fig. 15).
storage
1 You can store the vacuum cleaner and the accessories on the
charger (Fig. 22).
replacement
We advise you to replace the inner filter after a prolonged period of use
or if you can no longer clean it properly.
Replacing the inner filter (FC6145/FC6144/FC6140)
1 Remove the filter unit from the dust compartment (Fig. 13).
2 Turn the outer filter anticlockwise (1) and remove it from the filter
holder (2) (Fig. 16).
3 Gently turn the inner filter anticlockwise (1) and remove it from
the filter holder (2) (Fig. 23).
4 Place a new inner filter on the filter holder (1) and turn it
clockwise to attach it (2) (Fig. 24).
5 Push the tip of the inner filter inwards (Fig. 25).
6 Place the outer filter on the filter holder (1) and turn it clockwise
to attach it (2). (Fig. 17)
English 12