Bosch MUM 4750 UC - Manual (Page 13)

13
7. Turn power unit off.
When your work with the attachment is completed
or the capacity of the batch feed attachment has
been reached, turn the power unit to off position
O/Off", and then unplug.
8. Remove the attachment.
Remove the attachment from the power unit, in
some cases it will be necessary to move the arm to
allow removal of the attachment. Refer to the inĆ
structions for the specific attachment being used.
9. Continue use.
If the attachment was of the batch feed type and
you wish to continue using the attachment, empty
the bowl or jar of the attachment per its specific
instructions and reinstall the attachment as before.
Repeat the steps 5 through 7 as often as necesĆ
sary to complete necessary work.
10.Work completed, remove attachment.
If the attachment is of the continuousfeed type, or
is the batch type, and you have completed the
work you wished to perform with the attachment,
remove the attachment from the power unit. In
some cases it will be necessary to move the arm to
allow removal of the attachment. Refer to the inĆ
structions for the specific attachment being used.
11.Place contents (batch feed type)
If the attachment is the batch feed type, disasĆ
semble per the specific attachment's instructions
and place the contents in a suitable container.
12.Care and Cleaning
Once you have completed working with the Bosch
Kitchen Machine, the next step is to disassemble
and clean the attachments. If you wish to use
another attachment, please return toĂstep 4,
above.
With the power unit turned off and unplugged, it
should be cleaned only with a clean, damp cloth.
Then wipe off the motor drive cover and reinstall on
the power unit. Never use coarse or caustic cleanĆ
ing products to clean the power unit. Never imĆ
merse the power unit in water. Never use a steam
cleaner.
Power unit