Behringer XR4400 - Manual (Page 21)

21
MULTIGATE PRO XR4400
7. SPECIFICATIONS
AUDIO INPUT
Connectors XLR and 1/4" jack
Type RF filtered, servo-balanced input
Impedance 50 kOhm balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
AUDIO OUTPUT
Connectors XLR and 1/4" jack
Type Electronically servo-balanced output stage
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Max. Output Level +21 dBu, +20 dBm balanced and unbalanced
SYSTEM SPECIFICATIONS
Frequency Response 18 Hz to 30 kHz, +/- 3 dB
Noise >95 dBu, unweighted, 22 Hz to 22 kHz
THD 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk <-100 dB, 22 Hz to 22 kHz
GATE SECTION
Type UTR (Ultra Transient Response) gate
Threshold variable (BYPASS to +10 dBu)
Attack program dependent
Hold variable (0 to 4 sec)
Release variable (50 ms to 4 sec)
Range variable (0 to -80 dB)
EXPANDER SECTION
Type IRC (Interactive Ratio Control) expander
Attack program dependent
Ratio variable (1:1 to 1:4)
SIDE-CHAIN FILTER
Frequency variable (100 Hz to 10 kHz)
BW (Bandwidth) variable (2.3 to 0.7 oct.)
FUNCTION SWITCHES
Monitor monitors the side-chain key signal
Filter activates the side-chain filter
Mode gate/expander switch
Couple activates the FlexLink function
INDICATORS
“+” indicator signal is below threshold
“Hold” indicator signal reaches the threshold
“-” indicator signal is above threshold
Gain Reduction 8-segment LED display: 1/3/6/10/15/20/30/40 dB
LED indicator for each function switch
POWER SUPPLY
Mains Voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General Export Model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power Consumption max. 20 Watts
Fuse 100 - 120 V ~: T 630 mA H
200 - 240 V ~: T 315 mA H
Mains Connection Standard IEC receptacle
PHYSICAL
Dimension 1 ¾" (44.5 mm) * 19" (482.6 mm) * 8 ½" (217 mm)
Net Weight approx. 2.5 kg
Shipping Weight approx. 3.5 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
7. SPECIFICATIONS