Buffalo Technology Power Over Ethernet Receiver WLE-POE-R7 - Manual (Page 3)

3
Connecting the Devices
■
WARNING: Always connect the Power Supply Adapter to the
POE Receiver's POE port. Connecting to the LAN port may result
in damage or burnout of the equipment. Connecting a hub or PC
to the POE port may result in damage or burnout of the hub or PC.
◗ Connect the AirStation to the POE Receiver's LAN port..
◗ Connect the DC cable to the DC connector on the AirStation.
◗ Connect the Power Supply Adapter to the POE Receiver's POE port using
CAT5 (or higher) network cable.
■ NOTE: Using a different cable may prevent the supply of power to the
AirStation. Also, the POE receiver does not have a repeater function. Thus, the
total length of cable allowed between the Power Supply Adapter and the POE
Receiver is 100 meters.
Compatible Power Supply Adapters
◗ WLE-POE-S (Buffalo Technology)
◗ IEEE802.3AF compatible power supply unit.
Connections
LAN cable
AC adapter
This product
Use CAT 5 network cable or higher
POE port
LAN port
Supply Adapter
DC connector
AirStation or
BroadStation