BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 63)

SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your cell phone and other Bluetooth devices.
1. Press to access Main Menu.
2. Scroll to Connectivity, Select. Bluetooth, Select. Turn On, Select.
3. Continue pressing to exit.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1. Bring the cellular phone at about 20 cm from the Handsfree Kit.
2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode..
4. Press to access Main Menu. Scroll to Connectivity, Select. Choose Bluetooth,
Select.
5. Scroll to My devices, Select. New device, Add. The phone will then search
for pairable devices to be added.
6.
The searched devices will then be displayed. Choose the device name you want to pair
with this phone, then press Select.
7. Enter “0000” as the passcode then press Ok. If pairing is successful, the alternating
red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue.
8. Your device name is now added under My devices tab. Highlight the newly paired
device and then press Connect to completely establish connection between your cell
phone and your hands free kit.
9. When a statement appeared indicating that your device is connected, continue pressing
to exit.
The Handsfree Kit is paired and ready to use.
Notes: You only have to do the pairing process once for a particular phone. You will only redo
the process if you want to pair it with another mobile phone. If you turn off your Hands-free kit,
it will disconnect with your phone. If you turn it back on, you can reconnect by shortly pressing
the Pick-Up/Hang-Up Button on the Supertooth once for T610/T628/T630. For
K700i/S700i/Z1010/Z600 press the Pick-Up/Hang-Up button twice (Once will connect and then
activate voice dialing on some versions).
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1. Just shortly press the Pick-Up/Hang-Up Button to answer the call.
2. In your cell phone, a question will be displayed “…Answer?” If you press YES button
on your phone as reply, audio will still be heard on the SuperTooth.
To terminate the call, press the Pick-Up/Hang-Up Button.
63