BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 40)

d. MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Tap the number on the phone’s keypad, and then press the Talk key on the
phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Answer Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button on either device.
Voice Dialing
Set up voice commands for each contact as per the Phone’s user manual.
To activate voice dialing…
1. Press the Answer button once on the Supertooth
2. When prompted by a beep, say the name you wish to call.
Redial
Calls the last number dialed from the phone.
1. Press and hold for 3 seconds the Answer key on the Supertooth.
e. AUDIO TRANSFER DURING A CALL
1. Audio Transfer to the phone by accessing the phone’s Menu and selecting Transfer Call
to Handset.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit).
This will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth
by pressing the Reject button.
Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone
volume and ring settings to suit your cars environment.
40