Bosch GHO 36-82 C - Manual (Page 12)

English - 1
1 Fastening bolt for rebating depth stop*
2 Rebating depth stop*
3 Chip ejector (alternatively right /left)
4 Adjustment knob for planing depth
5 Planing depth scale
6 Indicator for direction of chip ejection
7 On/Off switch
8 Switch lock
9 Mains cable
10 Open-end spanner
11 Belt cover
12 Screw for belt cover
13 Planer shoe
14 V-grooves
15 Parallel guide*
16 Fastening bolt for parallel and angle guide
17 Locking nut for adjustment of rebating width
18 Scale for rebating width
19 Angle guide*
20 Locking nut for angle adjustment
21 Vacuum hose Ø – 35 mm*
22 Saw dust/wood chip bag with adapter*
23 Blade head
24 Clamping screw (3x)
25 Lateral blade-shaft protector
26 Blade-clamping element
27 HM/TC planer blade
28 Large belt pulley
29 Drive belt
30 Small belt pulley
31 Blade protector
* Accessories
* Not all of the accessories illustrated or described are
included as standard delivery.
The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for bevelling edges and
rebating.
For stationary use, the machine can be built into
the base unit UG 37 or the surface and panel
planer attachment ADV 82.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
If the mains cable is damaged or
cut through while working, do not
touch the cable but immediately
pull the mains plug. Never use the
machine with a damaged cable.
Wear safety glasses, protective
gloves and sturdy shoes.
Wear hearing protection. For long
hair, wear hair protection. Work
only with closely fitting clothes.
Tool Specifications
Planer GHO 31 – 82 GHO 36 – 82 C
Order number 0 601 593 1.. 0 601 593 6..
Rated power [W] 750 850
Output power [W] 420 450
No-load speed [rpm] 13 000 10 500
Planing depth [mm] 0 – 3.1 0 – 3.6
Rebating depth [mm] 0 – 24.0 0 – 24.0
Planer width (max.) [mm] 82 82
Weight (without accessories) approx. [kg] 2.8 2.9
Protection class / II / II
Machine Elements
Intended Use
For Your Safety
12 • 2 609 932 112 • TMS • 19.10.01