BT Synergy 2110 - Manual (Page 29)

Switchboard compatibility
Switchboard External Line
access code
27
Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
This product is intended for use
within the UK for connection to the
public telephone network and
compatible switchboards, which
support tone dialling and timed break
recall. If in doubt please consult your
service provider.
How many telephones can you have?
All items of telephone equipment have
a Ringer Equivalence Number (REN),
which is used to calculate the number
of items which may be connected to
any one telephone line. Your Synergy
2110 has a REN of 1. A total REN of 4
is allowed, if the total REN of 4 is
exceeded, the telephones may not ring.
With different telephone types there
is no guarantee of ringing, even when
the REN is less than 4.
Only use approved power supply, item
code 872273.
Only use approved batteries, item
code 871996.
RTTE
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards.
This equipment complies with the
essential requirements for the Radio
Equipment and Telecommunications
Terminal Equipment Directive
1995/5/EC.
Technical information
You may need to enter an access code
(e.g. 9) in order to get an outside line.
So that the switchboard has time to pick
up an outside line, you may also need
to add a Pause after the access code.
You can set your Synergy 2110 to
recognise that it needs to insert a
pause after your access code.
This means that a pause will be
automatically inserted into the
telephone number when it detects the
access code digits at the beginning of
the number.
Press the Options button.
Press 0 .
PIN
Enter the base station PIN.
(Original setting = 0000.)
Press the Options button.
Press 6 .
KEYPAD
Enter the access code, for
example
9 . A pause will be
entered after the access
code.
Press the Options button to
confirm.
To automatically insert a pause
Options
R
Options
R
Options
R
0
&./
6
MNO
GENERAL
INFORMA
T
ION