Caution, Display brightness, Door gasket heating control – Liebherr CBNes 6256 PremiumPlus BioFresh NoFrost User Manual
Page 7
![background image](/manuals/520465/7/background.png)
GB
=
Display brightness
Adjusting the display brightness
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds.
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment
Up/Down icons to select
0
= minimum to
5
= maximum brightness.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
=
Door gasket heating control
Condensed water on the gasket of the refrigerator doors can be
eliminated by activating the door gasket heating.
Activating the door gasket heating
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment
Up/Down icons to select
= at slight condensation of the gasket,
= at heavy condensation of the gasket,
= heater off.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
= Set BioFresh temperature
The temperature in the BioFresh drawers may be changed.
Setting the BioFresh temperature
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds.
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment Up/Down icons
and set
6 -
9
to increase the temperature (warmer),
4 -
1
to reduce the temperature.
CAUTION!
For values b4 - b1, the temperature in the drawers can
drop to below 0°C. Food may freeze.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
= Confirm dust filter cleaning
Once the dust filter in the appliance plinth has been cleaned, the
dust filter LED in the display must be cancelled.
Cancelling the dust filter symbol
• Activate setup mode by touching the SuperFrost icon for 5
seconds.
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• The dust filter symbol has been cancelled.
• Exit setup mode by touching
the freezer compartment On/Off icon.
19