Liebherr WKt 5551 GrandCru - Manual (Page 6)

16
Air exchange with activated charcoal filter
The way in which wines continue to mature depends on the
ambient conditions. The quality of the air is therefore decisive
for preserving the wine.
We recommend that you replace
the filter once a year. Filters can
be obtained from your dealer.
Changing the filter:
Take the filter by the handle.
Turn it 90° to the left or right
and remove.
Inserting the filter:
Insert with the handle in a verti-
cal position. Turn it 90° to the left
or right until it clicks into place.
Interior light
The interior of the appliance is lit by an LED light strip at the top
of the interior container.
The interior light will always switch on when the appliance door
is opened.
The light intensity of the LED light corresponds to laser
class 1/1M.
Important
The light cover may only be removed by customer service
staff. If the cover is removed, do not look directly at the
light through optical lenses from close distance. This can
damage your eyes.
Safety lock
The lock in the appliance
door is equipped with a safety
mechanism.
Locking the appliance:
• Insert the key as shown by
arrow 1.
• Turn the key 180°.
To unlock the appliance, the
same procedure must be re-
peated in the same order.
Additional functions
Adjusting the display brightness
Press for 5 seconds. Display =
Display =
Display =
Use buttons and to select the desired setting.
h1 = minimum brightness
h5 = maximum brightness
Display =
Display =
The adjusted brightness will be activated after one minute.
Note
If a button is pressed, the display lights up for one minute at
maximum brightness.
When commissioning the appliance, the adjusted brightness will
only be active once the set interior temperature of the appliance
has been reached.
Demo mode
Demo mode can be activated for presenting the appliance at
exhibitions or in salesrooms as though in normal operating mode.
When in this mode, the cooling circuit is switched off!
If this mode is activated by accident, it can be deactivated as
detailed below.
Press + for 5 seconds.
Display =
Display =
The refrigeration unit switches on.
The temperature display flashes.
The appliance is now in normal operating mode.