Liebherr LTF 1045-4.1 - Manual (Page 16)

PN 203.00.E07.2014 The illustrations contains also accessories and special equipment which are not included in the standard scope of delivery. Subject to alteration.
Liebherr-Werk Ehingen GmbH
Postfach 1361, 89582 Ehingen, Germany
 +49 7391 502-0, Fax +49 7391 502-3399
www.liebherr.com, E-Mail: [email protected]
www.facebook.com/LiebherrConstruction
Colour monitor
The readability of the data on
the monitor of the LICCON2
control in the superstructure
cab is improved by the colour
display. Warnings and the
crane utilization are easier
detectable.
Wireless remote control
(Option)
All crane motions can be controlled
outside of the cab.
• Higher efficiency
• Free view and closeness to the load
• Prevention of communication errors
between the crane driver and the
job site personnel
Attaching and detach-
ing of the hook block
The BTT Bluetooth Terminal offers
the crane driver the possibility to at-
tach or detach the hook block at the front
of the vehicle within sight, as the hoist winch
and the luffing cylinder of the telescopic boom
are remote controlled.
Touch displays
Below the joysticks, inte-
grated in the armrests, touch
displays are installed by
which the various operation
functions can be selected.
Beside others these are the
supporting of the crane and
the adjustment of the working
flood light as well as the heat-
ing and climate regulation.
Crane supporting
With the BTT the crane is supported
comfortably and safely. Engine start/
stop and speed regulation, electronic
inclination display and automatic sup-
port leveling are provided as standard.
Optionally at the BTT the support forc-
es can be displayed.
Wireless remote control
LICCON2 – safe and comfortable