Liebherr LHM 600 - Manual (Page 3)

LHM 600 3
Maximum crane capacity 208 t
Hook operation
on the ropes
Spreader operation
under
Outreach Heavy lift Single lift Twin lift
(m) (t) (t) (t)
12 208.0 41.0 50.0
17 208.0 41.0 50.0
18 203.9 41.0 50.0
20 185.4 41.0 50.0
22 168.4 41.0 50.0
24 153.2 41.0 50.0
26 141.2 41.0 50.0
28 130.4 41.0 50.0
30 120.0 41.0 50.0
32 110.5 41.0 50.0
34 102.0 41.0 50.0
36 94.8 41.0 50.0
38 88.6 41.0 50.0
40 82.7 41.0 50.0
42 77.3 41.0 50.0
44 72.2 41.0 50.0
47 65.4 41.0 50.0
48 63.5 41.0 48.3
50 59.6 41.0 44.4
52 56.1 41.0 40.9
53 54.5 41.0 39.3
56 50.2 36.7 35.0
58 47.8 34.3 32.6
Heavy duty operation
Project Cargo & Heavy Duty up to 208 tonnes
Safety and precision are the most important criteria when lifting heavy goods.
• The hydrostatic drive concept in connection with closed
hydraulic circuits guarantees immediate system reaction
times for rapid and safe working cycles.
• The X-shaped propping arrangement forms the basis
of a unique stress flow-system absorbing all static and
dynamic demands resulting from travelling and operation
of the crane.
• Stresses and strains occurring during heavy lift operation
are thereby transmitted via the shortest route through the
centre of the chassis onto the outriggers and further to
the ground.
• Torsion strain in the undercarriage is reduced to a
minimum.
• Lifetime of the slewing bearing and all supporting parts
enhances.
• The luffing cylinder also uses a closed hydraulic circuit,
assuring accuracy without vibration.
• Sycratronic ® allows two Liebherr mobile harbour cranes
to be operated simultaneously by one crane driver for
improved speed, capacity and safety.
Weight rotator 4.5 t
Weight fully automatic (telescopic) spreader 9 t
Weight twin lift spreader 10.7 t