Liebherr LTM 1070-4.2 - Manual (Page 13)

LTM 1070-4. 2
13
With proven components
The drive components for the crane operation are designed for high performance
and provide for sensitive and precise handling of the load. They are specially tuned
for the crane operation and proved in severe long-term tests.
• Crane drive from diesel engine in chassis
• Optimized fuel consumption by electronic engine management
• Diesel-hydraulic crane drive, open hydraulic circuits with electric
„LOAD SENSING“-control, 4 working motions simultaneously possible
• Electric/electronic SPS-crane control via the LICCON-computer system
• Comfortable armrest controls with 2 self-centering 4-fold multifunctional joysticks,
stepless control of all crane motions, with winch and slewing gear indicators
• Slewing gear standard reversible from open to hydraulically locked, so the
slewing motion can be optimal adapted for the different operation conditions,
e. g. sensitive for installation work or fast for cycle work
Powerful crane drive
The slewing gear
• Planetary gearbox, spring loaded
multi disk brake
• Reversible open or hydraulically
locked as standard
• Slewing speed from 0 to 1.5 min -1
infinitively variable
• 6 stages between 15 % and
100 % preselectable
The central greasing
• Standard central greasing device
for slewing bearing, boom bearing,
luffing cylinder and winch bearing
• Even supply of grease
• Filling quantity visible at any
time in transparent reservoir
Basic counterweight 10.7 t
Additional counterweight 3.8 t
Total
14.5 t
5 t
0.7 t
5 t
1.4 t + 1.2 t
12 t 12 t
1.2 t
LICCON-
monitor
Control sensor with touch displays
Control unit
Telescoping
cylinder
Luffing
cylinder
Control block
Hoist gear
Slewing
gear
Hydraulic swivel
Gear type pump
Variable
displacement
pump
Liebherr
diesel engine
Sensors