Bacharach 2800 - Manual (Page 2)

• Compact & lightweight
• Rapid detection of changing
CO
2
levels
• Maintenance free dual wavelength
infrared CO
2
sensor
• Visual and audible alarms
• 8 to 10 hours use on a full charge
• Quick, intelligent charge In less
than two hours
• Automatic datalogging provides
complete CO
2
exposure record
• Two way IrDA communication link
• Easy to read digital display
• Easy calibration in fresh air
• Simple to use
Range* 0-50,000 ppm CO
2
0-5% CO
2
Resolution 100 ppm (0.01%CO
2
)
Response Time T90<10 seconds @ 5,000 ppm and 10,000 ppm
Audible Alarm 85dB @ 0.5 meters
Case Seal NEMA 12 (IP65); dust and water resistant
Power Source Nickel-metal hydride battery providing up to 10 hours of continuous use
Operating Temp. 32°F to 104°F (0°C to 40°C)
Relative Humidity 0 to 99% (non-condensing)
Dimensions 5.5"L x 2.6"W x 0.8"H
(140 mm x 66 mm x 20 mm)
Weight 7 ounces (200 grams)
Construction Hi Impact ABS case
PA RT NO. D E S C R I P T I O N PA RT NO. D E S C R I P T I O N
19-7101 CO
2
Monitor 2800
19-3301 IrDA Interface/Software
19-3302 In-car charger
19-3303 Earphone
19-3304 Protective Boot
19-3305 Calibration Cup
51-2978 Calibration Kit
54-0600 Calibration Gas (340 ppm CO
2
)
Features & Benefits
Specifications
Ordering
Information
Bacharach is a registered trademark of Bacharach, Inc.
©September, 1996, Bacharach, Inc., all rights reserved. All information herein is subject to verification. Manufactured in the USA.
Product Bulletin-5208 10/98 10M
World Headquarters: 625 Alpha Drive, Pittsburgh, PA 15238 phone: 1-800-736-4666 website: w w w.bacharach-inc.com
*Factory or user-selectable with optional software