Blaupunkt ACD 9431 - Manual (Page 9)

ACD 9431
18
Modifications reserved!
Review (Fast backward):
•
Keep depressed the left side of the
rocker switch < >
7 for more than
than 1 second.
Mix Function
Press the Mix button 5 to listen to the titles
in an arbitrary order.
When Mix is on, the “Mix” indication lights up
on display
9 j.
Changing the Audio Source with
SRC
You can shift between the connected audio
sources in the order CD
♦ Radio ♦ CD. To
switch over to another audio source during
CD operation,
•
press the SRC button 6 .
The set changes to radio operation.
Programming with DSC
The car radio’s DSC function (Direct Soft-
ware Control) allows you to individually ad-
just the seek tuning sensitivity for FM and
AM.
Adjusting the seek tuning sensitivity:
•
Press the lo•m 5 button longer than
8 secs. The display gives you “lo” and a
number between 1 and 3.
• Adjust the sensitivity using the rocker
switch < >
7 .
1 = ^ high sensitivity
3 = ^ normal sensitivity
To store the adjustment,
•
press th lo•m button once again.
Appendix
Technical Data
Amplifier:
Output power:
4 x 8 watts acc. to DIN
45324/3.1
FM:
Frequency
response:
50 - 16 000 Hz (-3dB)
CD:
Frequency
response:
20 - 20 000 Hz (-3 dB)
Preamp-Out: Output impedance
150
Ω
What to Do If Your Car Stereo
Needs Service?
Whenever your car radio fails to operate
properly and therefore requiring repair by an
authorized service centre, please do not for-
get to take the car radio passport along with
you.