Billy Goat MV650H User Manual
Page 14
Part No 840186
14
Form No F030106A
MV650H PUSH Vacuum Owner’s Manual
3. Pull starter rope to start engine.
PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid
kickback.
4. Move throttle control back to RUN position and allow engine to reach correct operating speed.
V
ACUUM
N
OZZLE
H
EIGHT
A
DJUSTMENT
FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into
the nozzle. NOTE: Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank
handle clockwise and counter-clockwise.