Buffalo Technology HS-DGL Series - Manual (Page 30)

0
Basic Settings - Time and Date
Time Setup: The LinkStation time must be
set correctly to maintain logs and to schedule
backups. Input the time and date or press
the Get Current Date & Time button to set
LinkStation’s time to the same time as the
PC that is being used to configure it. Check
the Daylight Savings Time checkbox if your
region is currently in DST. This will have to be
unchecked in the fall and checked again in the
spring each year. Select the appropriate region
from the Character Codes pull down menu.
This activates LinkStation’s International
Character Support.
NTP Settings: The NTP function enables the LinkStation to poll a network time server to correct its
time. Once enabled, an IP Address of a NTP Server is required. A domain name will not work in
this field; an IP Address is required. Buffalo recommends use of (time.nist.gov) 192.43.244.18 as
an Internet NTP Server. Sychronized Interval sets how often time will be checked.
Press the appropriate Apply to save any changes.