BenQ Joybook 2000 Series - Manual (Page 33)

Installing Additional Memory 29
6. Align the memory module with the slot, and then insert it. When
inserting, pay attention to the direction of the memory module.
7. Gently push the free edge downwards until the module locks into
place.
8. Replace the cover and use a screwdriver to secure it with the screw.
9. Slide the battery back to its original position until you hear a click.
Connect the AC adapter and start up your Joybook. During the star-
tup process, Joybook will automatically test and configure the newly
installed memory.
JB2000E.book Page 29 Tuesday, March 23, 2004 8:57 AM