Philips Clé USB - Manual (Page 6)

Click Search for the best driver for your device.Then click
the Next button.
Click Specify a location.Then click the Browse button.
When the dialog box appears, specify the folder where the
installation program is stored.
Click the OK button to close the dialog box.Then click the
Next button.
Click the Next button.
Click the Finish button.
> Installation of the driver starts.
> Once the installation process is complete, a drive icon for the
USB flash drive appears in the My Computer window.
After confirming that the drive is in standby mode you can remove
the drive from the computer’s
USB port.
Note
Do not remove the drive from the computer USB port as long as
the download process is in progress. Be sure that the write protection
switch (fig. 2) is in the unprotected (left) position
during installation.
4 Connect
Connecting the USB flash drive to your computer
Note
If the USB port of your computer is not easily accessible,You can use a
USB extension cable or an optional USB hub to connect the USB flash
drive to your computer.
Remove the protective cap from the USB connector and turn
it backwards (fig. 1). 1
11
10
9
8
7
6
5
6
ENGLISH
②
①
1