Philips Clé USB - Manual (Page 5)

2 Your USB flash drive
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your
product at www.philips.com/welcome.
3 Install
Microsoft® Windows Vista, XP, 2000, ME, MAC OS 9.0 or
higher:
• The device driver is installed automatically when the drive is
connected to a USB port of the computer. However, with some USB
2.0 cards or boards, you may need to initiate installation manually. In
this case, follow the on-screen instructions to search for a suitable
driver. Refer to the operating system's Help file if you need any
help.
Note
Do not remove USB flash drive from the computer USB port as long
as the download process is in progress. Be sure that the write
protection switch (fig. 2) is in the unprotected (left) position
during installation.
Windows 98/ 98SE:
Download the device driver at
http://www.philips.com/storage.
Remove the protective cap from the USB connector and turn
it backwards (fig. 1).
Insert the flash drive USB connector into one of the computer’s
USB ports (fig. 2).
> The New Hardware wizard starts and the drive’s LED lights up.
The light intensity of the LED will gradually increase and then
diminish again.This will continue for as long as the drive is
connected to the computer.
Click the Next button. 4
3
2
1
5
ENGLISH
②
①
1
2