Black & Decker GSL35 - Manual (Page 6)

6
• Regularly clean the ventilation slots in your tool and charger using
a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use
any abrasive or solvent-based cleaner.
• After use, carefully clean the blades. After cleaning, apply a film of
light machine oil to prevent the blades from rusting.
Storage
When the tool will not be used for several months, ideally leave the
battery connected to the charger. Otherwise proceed as follows:
• Fully charge the battery.
• Store the tool in a secure and dry location. The storage temperature
must always remain in the range of 41°F (5°C) to 104°F (40°C).
• Before using the tool after prolonged storage, fully charge the
battery again.
Accessories
• Recommended accessories for use with your tool are available from
your local dealer or authorized service center. If you need
assistance regarding accessories, please call: 1-800-544-6986.
WARNING
: The use of any accessory not
recommended for use with this tool could be hazardous.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery
Recycling Corporation) Seal on the
nickel-cadmium or lithium-ion battery
(or battery pack) indicates that the costs to recycle the battery (or
battery pack) at the end of its useful life have already been paid by
Black & Decker. In some areas, it is illegal to place spent
nickel-cadmium or lithium-ion batteries in the trash or municipal
solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC in cooperation with Black & Decker and other battery users,
has established programs in the United States and Canada to
facilitate the collection of spent nickel-cadmium or lithium-ion
batteries. Help protect our environment and conserve natural
resources by returning the spent batteries to an authorized
Black & Decker service center or to your local retailer for recycling.
You may also contact your local recycling center for information on
where to drop off the spent battery, or call 1-800-8-BATTERY.
Service Information
All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power tool
service. Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow
page directory under "Tools—Electric" or call: 1-800-544-6986 or
visit www.blackanddecker.com
Full Two -Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store
is a participating retailer). Returns should be made within the time
period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a
Black & Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required.
Black & Decker owned and authorized service centers are listed
under "Tools–Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which vary
from state to state. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-544-6986 for a free
replacement.
90556224 REV. 1 Garden Shear Manual.qxd: chainsaw booklet new 12/4/09 12:42 PM Page 6