Black & Decker NST1024 - Manual

KEY INFORMATION YOU SHOULD KNOW:
• Battery ships from the factory without a full charge. For optimal
performance and runtime charge battery for 9 hours before
attempting to use your trimmer/edger.
• To operate the trimmer, the lock out button must be pressed in.
• This is an automatic feed trimmer – Do not bump head against
ground.
• Use only .065 inch (1.65 mm) diameter line. For optimal results,
use Black & Decker factory wound spool, catalog #AF-100.
• Install guard and auxiliary handle.
• Phillips screwdriver required (not supplied) to install guard.
• For trouble free feeding and best results, only use
Black & Decker replacement spools with single 0.065 inch
line. Black & Decker replacement spool model number
AF-100.
1
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
NST1024 TRIMMER/EDGER
INSTRUCTION MANUAL
Thank you for choosing Black & Decker! Go to
www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem
with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you can’t find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak
with an agent. Please have the catalog number available when you call.
for instant answers 24 hours a day.
90563738 NST1024.qxd: chainsaw booklet new 5/25/10 1:13 PM Page 1