Philips AVENT Écoute-bébé DECT - Manual (Page 19)

19
• If all four segments are filled, the sensitivity
is at its highest level.
• If all segments are empty, the sensitivity is
at its lowest.
3
Press OK to confirm the setting.
7.2.1 Sensitivity levels and indications
Icon Sensitivity Description
highest Hear everything from your
baby. The speaker of the parent
unit is continuously on.
high Hear all sounds from soft
babbling and louder. If your
baby does not make any
sound, the speaker of the
parent unit is off.
medium Hear sounds from soft cries
and louder. If your baby makes
softer sounds, the speaker of
the parent unit does not go on.
low The speaker of the parent unit
only goes on if the baby makes
loud sounds, for instance
because it is crying.
2
Use the + button to go to the next option or
the - button to go to the previous option.
D Note:
The arrow on the display indicates in which
direction you can navigate.
3
Press the OK button to confirm your
selection.
D Note:
Press the MENU button if you want to leave the
menu without making any changes. If there is no
input in the menu for more than 20 seconds, the
menu closes automatically.
7.2 Sensitivity
This option in the parent unit menu allows you to
set the microphone sensitivity on the baby unit.
The microphone sensitivity determines what noise
level the baby unit picks up, e.g. you will want to
hear when your baby cries, but you may be less
interested in its babbling
1
Select ‘Sensitivity’ in the menu with the + and
- buttons and press OK to confirm.
2
Use the + and - buttons to increase or
decrease the microphone sensitivity. The
sensitivity indication on the display has four
segments.
ENGLISH