Philips AVENT Écoute-bébé DECT - Manual (Page 15)

15
D Note:
If you have set the volume for the lullaby
higher on the baby unit, the sound will also be
louder when you use the talk function on the
parent unit.
• The ‘link’ light starts flashing green and the
message ‘TALK’ appears on the display.
2
Release the TALK button when you have
finished talking.
6.4 Night dim mode
In night dim mode, the light intensity of the lights
and the display is reduced and the volume of alert
sounds is decreased.
1
Press the night dim button to activate the
night dim mode.
• The night dim mode symbol appears on the
display.
• The sound level lights and the link light are
dimmed.
• The backlight of the display is dimmed.
• The volume of any sound alerts set on the
parent unit is reduced.
• If no button is pressed for more than
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.2.2 Volume off
Below the lowest volume setting, there is a
‘volume off’ setting.
1
Press the + button or the - button once.
• The current volume level appears on the
display.
2
Press and hold the - button for more than
2 seconds to set the volume to off.
• The message ‘MUTE’ and the mute symbol
appear on the display.
D Note:
If the volume is off, only the sound level
lights show that the baby produces
sounds.
6.3 Talk function
You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
1
Press and hold the TALK button and talk
clearly into the microphone on the front of
the parent unit from a distance of 15-30cm
(0.5-1ft).
ENGLISH