BT Freestyle 310 - Manual (Page 14)

Using the phone
14
BT Freestyle 310 – Issue 2 – Edition 01 – 08.01.06 – 7971
Call timer
Your handset will automatically time
the duration of all external calls. The
handset display shows the call duration
both during and for a few seconds
after your call.
Switch the handset power on/off
1. Press and hold then press Yes to confirm.
2. To switch handset back on, press and hold then press No
to switch back on.
Make an external call
1. Press . The icon is displayed. Dial the telephone number.
Preparatory dialling
1. Enter the number first. If you make a mistake, press Del to
delete the last digit. Press to dial.
End a call
1. Press or place the handset back on the base/charger.
Receive a call
When you receive a call, the phone rings and the icon
flashes in the display. If you have subscribed to your network’s
Caller Display service, the caller’s details will be displayed.
See page 21 for more information.
1. If your handset is on the base, pick it up to answer the call.
Or, if your handset is off the base, press .
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
Auto answer
If auto answer set to ON you can just
pick the handset up off the base to
answer a call. If auto answer is set to
OFF, you will need to press .
Auto answer ON is the default setting.