Behringer Ultracoustic ACX1000 - Manual (Page 6)

6
ULTRACOUSTIC ACX1000
1. INTRODUCTION
1.2 Before you begin
Your BEHRINGER ULTRACOUSTIC was carefully packed in
the factory and the packaging is designed to protect the unit
from rough handling. Nevertheless, we recommend that you
carefully examine the packaging and its contents for any signs
of physical damage, which may have occurred during transit.
Damaged units should NEVER be sent directly to us.
Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may
be rendered invalid.
Please always use the original packaging to avoid
damage due to storage or shipping.
Never let unsupervised children play with the A16
or with its packaging.
Please dispose of all packaging materials in an
environmentally friendly fashion.
Be sure that there is enough space around the unit for cooling
and please do not place the ULTRACOUSTIC on high temperature
devices such as radiators etc. to avoid overheating.
Before you connect your ULTRACOUSTIC to the
mains, please make sure that your local voltage
matches the voltage required by the unit!
The mains connection of the ULTRACOUSTIC is made by using
the enclosed mains cable and a standard IEC receptacle. It meets
all of the international safety certification requirements.
Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cable.
IMPORTANT NOTES CONCERNING INSTALLATION
The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the
transmitter and the device and use shielded cables
for all connections.
The MIDI connection (IN) is made with standardized DIN plug-in
connectors. An optocoupler has been used for isolated data
communications.
You will find additional information in chapter 3
“INSTALLATION”.
1.3 Online registration
Please do remember to register your new BEHRINGER
equipment right after your purchase by visiting
www.behringer.com (alternatively www.behringer.de) and
kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!