Glen Dimplex Home Appliances Ltd Front & Side Control Gass Hobs 70T - Manual (Page 19)

Troubleshooting
Before you call Customer Care, please
check the following points:
Burner fails to ignite:
•
Check the electricity supply is on.
• Check the fuse.
There is a spark to the burner
but it fails to ignite:
•
Check that the flame holes in the
flame spreader are clear of water
or deposits.
• Check that the gas supply is turned
on.
Smell of gas:
•
Check that none of the controls
have inadvertently been turned
on. If all the controls are in the off
position, turn off the gas supply &
call Customer Care.
The burner flame appears
uneven:
•
Check the burner is fitted correctly.
• Check the flame holes in the flame
spreader are clear of water or
deposits.
19