Lights – BMW Motorrad K1300S User Manual
Page 59
Press button 1 repeatedly un-
til tire inflation pressures are
shown.
The tire inflation pressures are
displayed with the lettering
RDC P
. The left-hand value
indicates the inflation pressure of
the front wheel, and the right-
hand value the inflation pressure
of the rear wheel. The displayed
tire inflation pressures refer to a
tire temperature of 68 °F (20 °C).
Immediately after switching on
the ignition,
-- --
is displayed,
as the transfer of the inflation
pressure values does not begin
until a speed of 20 mph (30 km/
hr) is exceeded for the first time.
Lights
Parking lights
The side lights switch on au-
tomatically when the ignition is
switched on.
The parking lights are a
strain on the battery. Do
not leave the ignition switched
on longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
With the engine switched
off, you can switch on the
lights by switching on the high-
beam headlight with the ignition
switched on or by operating the
headlight flasher.
High-beam headlight
Press high-beam headlight
switch 1 forward.
High-beam headlight is
switched on.
4
55
z
Operation