BMW Motorrad K1300S - Manual (Page 43)

Tire inflation pressure in
limit area of permissible
tolerance
General warning light shows
yellow.
Tire symbol appears on the
display.
The critical tire inflation pressure
flashes.
Possible cause:
The measured tire inflation pres-
sure is in the limit area of the
permissible tolerance.
Correct tire inflation pressure in
accordance with instructions on
back of cover of Rider's Manu-
al.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Tire inflation pressure
outside permissible
tolerance
General warning light flash-
es red.
Tire symbol appears on the
display.
The critical tire inflation pressure
flashes.
Possible cause:
The measured tire inflation pres-
sure is outside the permissible
tolerance.
Check tire for damage and
drivability.
Is it still possible to drive with tire:
Incorrect tire inflation pres-
sure result in poorer han-
dling of the motorcycle.
Always adapt your driving style
to the incorrect tire inflation
pressure.
Correct tire inflation pressure at
next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Have the tire checked for dam-
age by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
If you are unsure about the driv-
ability of the tire:
Do not continue driving.
Inform roadside service.
Transmission error
" -- " or " -- -- " is indicated.
Possible cause:
The motorcycle's speed has not
exceeded the threshold of ap-
prox. 20 mph (30 km/h). The
TPC/RDC sensors do not send
their signal until after this speed
3
39
z Status indicators