beautypg.com

2 of 3, Features, Overview – Black Box SME-4M User Manual

Page 2

background image

2 of 3

FEATURES

• Replaces two modems in point-to-point

applications.

• Speeds up to 38.4 kbps.

• Small and lightweight. Easy to install

or replace in the field.

• LEDs show DSR, CTS, and TXD for

both ports.

• Front-panel switches set signals and

select test mode.

• Operates transparently, sync or async.

IBM compatibility at two different speeds. Runs sync or async, too!

OVERVIEW

The Synchronous Modem Eliminator (SME-4M) enables

a mainframe or minicomputer to communicate locally with
another mainframe, minicomputer, or remote controller.
And best of all, it saves you money because the SME-4M
replaces the two modems or line drivers normally needed
for such communication.

Just one versatile SME-4M enables asynchronous,

synchronous, or bisynchronous communications between
two DTEs over RS-232C cable.

In synchronous mode, the unit operates at data rates that

top out at 38.4 kbps. Plus the SME-4M operates transparently
in either synchronous or asynchronous mode. You can also
configure the SME-4M to operate at some nonstandard data
transmission speeds. To set the SME-4M for one of these
speeds, configure the unit according to the chart on the right.

The SME-4M is small and lightweight, so it’s easy to handle.

And because no special tools are needed, installation is simple.

The modem eliminator’s front panel has six LEDs and

three switches. The six LEDs indicate Clear To Send (CTS),
Transmitted Data (TXD), and Data Set Ready (DSR) for each
port. The three switches include Ring Indicator (RI) and
Control Data Set Ready (CON) signals, and (LB) selects the
Digital Loopback Test Mode.

Use the SME-4M’s diagnostic loopback capability to test

asynchronous applications. Simply press the switch and enter
data at the host terminal or computer. That data should
return to you exactly as you sent it.

The unit fits neatly on a desktop. Each SME-4M is shipped

with a 115-VAC power transformer and a user’s manual.

SME-4M

(ME251A-R3)

IBM

®

mainframe

RS-232 Cable

(ECM25C)

RS-232 Cable

(ECM25C)

S/3X or

AS/400

®

host

2/22/2007
#10205

724-746-5500

blackbox.com

Strap Position

Transmission Rate (bps)

a

76,800

b

153,600

38,400

38,400

19,200

19,200

9600

9600

4800

4800

2400

2400

1200

1200

Crystal Frequency

2.4576 MHz

Buyer’s Guide

Transmission Speeds