Brinkmann ProSeries 2310 - Manual (Page 29)

28
Step 15
Attach the hose heat shield to the
right side of the cart frame using
two #8 self-tapping screws.
Step 16
Remove two bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
table base, then firmly seat the
valve nozzle into the burner venturi.
Hold in place while you perform
Step 18.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on “Leak Testing” in this
manual for proper
procedures.
Step 17
Place the bezel over the control
knob mounting stem and position
over holes in side burner base and
side burner valve assembly. Attach
with two M4 bolts with spring
washers which come with valve.
Then install the side burner control
knob onto valve stem.
Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Side
Burner
Control
Knob
Bezel
Hose
Heat Shield