Brinkmann ProSeries 2310 - Manual (Page 27)

26
NOTE: When performing Step 11,
Lift grill body from front and
rear panels to avoid injury
to hands and fingers.
Step 11
With the help of a friend, place grill
body assembly on cart frame. Grill
body will rest on angled base of
vertical supports. Align bolt holes
located on the outside of the grill
body assembly. Secure using four
M6 X12mm bolts (black) with star
washers (black).
Step 12
Insert right side door over lower
pivot (on bottom cart panel) then
align door with cart frame. Depress
spring pin located on top edge of
door and slide door toward side
cart panel until spring pin locks into
hole in door bracket. Repeat for
other door.
Grill Body
Assembly
Spring Pin
Lower Pivot