Blaupunkt PORTO CD34 7 644 176 310 - Manual (Page 12)

35
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮
briefly press the BND•TS button
4
.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮
Press the or button
7
.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
7
.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
Note:
●
The RDS function must be activat-
ed before you can use this feature.
➮
Press the or button
7
to
switch to the next station on the
broadcasting network.
Note:
●
When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮
Press the MENU button
8
.
➮
Press the or button
7
re-
peatedly until “SENS” appears in
the display.
➮
Press the button
7
.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮
Set the sensitivity level that you
want using the
buttons
7
.
When you have finished making your
changes,
➮
press the MENU button
8
.
Note:
●
You can set different sensitivity lev-
els for FM and MW or LW (AM).
RADIO MODE