Blaupunkt PORTO CD34 7 644 176 310 - Manual (Page 11)

34
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
➮
press the BND•TS button
4
.
or
➮
press the SRC ( ) button
6
re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
Convenient RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
●
AF: If you activate this RDS func-
tion, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
●
REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REGIONAL function to pre-
vent the car radio from switching to
alternative frequencies that are
transmitting different programme
content.
Note:
●
REGIONAL must be activated/de-
activated separately in the menu.
Switching REGIONAL on/off
➮
Press the MENU button
8
.
➮
Press the or button
7
re-
peatedly until “REG” appears in the
display. “OFF” or “ON” is displayed
alongside “REG”.
➮
To switch REGIONAL on/off, press
the or button
7
.
➮
Press the MENU button
8
.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮
press and hold down the TRAF/
RDS button
:
for longer than two
seconds.
The RDS functions are active when an
RDS symbol lights up in the display.
Selecting the waveband /
memory bank
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Six stations can be stored in each mem-
ory bank.
RADIO MODE