Philips Grind & Brew Cafetière - Manual (Page 8)

8
13
Turn the knob to select the desired coffee
strength (mild: 1 bean, medium: 2 beans or
strong: 3 beans).
• The display shows the selected coffee
strength.
E Tip:
We advise you to experiment with
the amount of water to find out which
strength you prefer. If you select a number
of cups that is higher than the amount of
water, the coffee becomes stronger. If you
select a number of cups that is smaller
than the amount of water, the coffee
becomes weaker.
14
Press in the centre of the knob to confirm,
Then press in the centre of the knob again to
start the brewing process.
• The grinder grinds the required amount of
coffee beans.
15
Wait until the coffeemaker has stopped
brewing before you remove the jug.
D Note:
After brewing, coffee drips from the filter
basket for several seconds.
10
To select the number of cups, turn the knob
until the desired number of cups appears on
the display.
D Note:
Make sure that the number of cups you select
with the 2-10 cups button is consistent with
the amount of water in the water reservoir.
Please keep in mind that the coffeemaker
uses all the water in the water reservoir. If you
select a number of cups that is smaller than
the amount of water, the coffee becomes
weaker than you intended.
11
Press in the centre of the knob to confirm the
number of cups.
12
Press the strength select button.
• The coffee bean icons start to flash.