B&B Electronics RS-232 to Ethernet Converter ES1A - Manual (Page 27)

Using the Web Configuration and Management Interface
Manual Documentation Number ES1A -2907m pn6909-rev003 15
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Consult the web-based tutorial and/or your network administrator for more
information on Network Services and Advanced Network settings.
Configuring the Serial Port
The Serial Port Configuration page displays information about the serial
port on your ES1A, including its description, its profile (operating mode) and
serial settings (baud rate, data bits, parity, stop bits). You will have to
configure these parameters to set up your system for the type of operation
required and to match the parameters of the serial device to which the ES1A
is connected.
To open the Serial Port Configuration page, under the Configuration menu
click Serial Ports. When you first access this page a list of ports, their
description, profile and serial configuration appears. (If the ES1A has not yet
been configured for the first time the Profile column may indicate
.)
To access detailed settings for the ES1A serial port, click Port 1. The Serial
Port Configuration page that appears includes three sections with
hyperlinked menu bars.
• Port Profile Settings
• Basic Serial Settings
• Advanced Serial Settings
Port Profile Settings
The Port Profile Settings section displays the current serial port mode of
operation, a description of that profile and a hyperlink to Change Profile…
Click the Change Profile… menu bar to open the Select Port Profile page.
Any of eight possible serial port profiles can be selected.